What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Spinner Hole Location

JDA_BTR

Well Known Member
I have an "opaque" spinner. I suppose most of us do. The plans don't work straight up. Is the process mark the hole locations on the spinner plate, drill the holes, then use the magnet method to locate the spinner holes on the fiberglass exterior?
 
The magnet method works

I just helped helped a RV-7A builder with this step. The 7's spinner comes gelcoated as well now. We used the magnet method and it worked great.
 
Back
Top