What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Coating inside cowl?

I

ILikePike

Well Known Member
I have finished installing, filling, and sanding the top cowl inlet ducts. I coated the inside surface with straight West epoxy. What's the consensus for primer and a white coating?
 
West Systems sells a white tint that you can mix into the epoxy. I found it at the local West Marine store. I put on three coats of the tinted epoxy and it looks like this:

IMG_3720-M.jpg


A little bit of sanding between coats and it is as smooth as glass.
 
I am planning on having mine sprayed with an expoxy primer and will apply Vans heat reflecting sheet afterward.


Glenn Wilkinson
 
You must log in or register to reply here.
Back
Top