VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 11-07-2017, 12:34 PM
rv8ch rv8ch is offline
 
Join Date: Feb 2005
Location: LSGG
Posts: 2,113
Default running wires through glareshield

I expect that I will need to run some wires up to my glare shield - perhaps a HUD one day or at least an AOA - and I know some put their GPS puck there.

Does anyone have a clever way to do this? I've seen a simple plastic or rubber grommet but was thinking about something like some overlapping rubber flaps, or some brushes, or something else. It would allow a tight seal so stuff does not drop down there, and be big enough to pass the cable connector through, and allow for future expansion.

Thanks for any suggestions.
__________________
Mickey Coggins
http://rv8.ch
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:43 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.