Canopy and skirts are installed on my RV-8 and I am now looking at making the windscreen fairing and molding strip.
Problem: My skirt sits about 5/8 inch above the fuselage.
Question: How should I build up the mating area under the windscreen so that it will overlap the skirt? It would take a gazillion layers of cloth.
Would it be acceptable to build up the area with flox and then add a layer of cloth on top of the flox?
Thanks for any suggestions.
Mike Draper
RV-8 N468RV
TMX 0360, CS
Finishing, Finishing, Finishing...
Problem: My skirt sits about 5/8 inch above the fuselage.
Question: How should I build up the mating area under the windscreen so that it will overlap the skirt? It would take a gazillion layers of cloth.
Would it be acceptable to build up the area with flox and then add a layer of cloth on top of the flox?
Thanks for any suggestions.
Mike Draper
RV-8 N468RV
TMX 0360, CS
Finishing, Finishing, Finishing...
Last edited: