Subwaybob
Well Known Member
Background:
I have an Infinity grip installed to a 3 axis trim relay. One axis is for the flaps and the other two for roll and pitch. (Works fabulous BTW) I also have on the panel the rocker switches from Ray Allen. I would like to wire those as I did the flaps switch on the panel. (It is wired to activate ground so it will work on my 3 axis trim.) My guess is they are just DPDT switches. However as you may know it has a power, ground and two white wires coming out.
Question:
Any suggestions on how to wire those so one wire will ground when you push to the left and the other ground when you push to the right?
Thanks in advance!
I have an Infinity grip installed to a 3 axis trim relay. One axis is for the flaps and the other two for roll and pitch. (Works fabulous BTW) I also have on the panel the rocker switches from Ray Allen. I would like to wire those as I did the flaps switch on the panel. (It is wired to activate ground so it will work on my 3 axis trim.) My guess is they are just DPDT switches. However as you may know it has a power, ground and two white wires coming out.
Question:
Any suggestions on how to wire those so one wire will ground when you push to the left and the other ground when you push to the right?
Thanks in advance!