Larry DeCamp
Well Known Member
The control horn on my 2010 vintage empennage kit hits the horizontal stabilizer spar flange before reaching 20/25 degree down deflection. Even with the center bearing bracket bolt head removed, it is still short of specified 20/25 degree deflection.
The steel horn stamping is different than the 2008 vintage part on on the salvage plane I am rebuilding.The new horn is much wider than the the drawing shown in the plans set. I assume it is a universal part to be used on multiple RV's. This is not a crisis. I am just seeking the benefit of other's experience before solving the problem.
The steel horn stamping is different than the 2008 vintage part on on the salvage plane I am rebuilding.The new horn is much wider than the the drawing shown in the plans set. I assume it is a universal part to be used on multiple RV's. This is not a crisis. I am just seeking the benefit of other's experience before solving the problem.