RV 7 GOPRO CAMERA MOUNT PRINTED ON MODIX BIG60

I PURCHASED THIS 3D PRINTER FROM MODIX IN ISRAEL FOR SOME LARGER PARTS SUCH AS GEARBOX CASTINGS. I AM FINDING OTHER THINGS TO USE IT FOR, LIKE THIS GOPRO CAMERA MOUNT.

MODIX BIG60 PRINTER DETAILS:

24X24X24 PRINT VOLUME SIZE
.4mm NOZZLE DIAMETER
1.75mm PLA MATERIAL
2HR 15 MIN PRINT TIME

CAMERA MOUNT IS ATTACHED WITH 3M VHB TAPE, MATCH DRILLED THEN V-STAB SKIN IS TAPPED AT FIBERGLASS RIVET LINE FOR 8-32 SCREWS (LIGHTLY SCREWED INTO SKIN)

http://www.youtube.com/watch?v=F6bEqWFntOg

I?ll buy one

I was going to make one of these out of layer up fiberglass this summer.

But if your selling, I?ll buy one


Paul

ROTARY7 said:

I PURCHASED THIS 3D PRINTER FROM MODIX IN ISRAEL FOR SOME LARGER PARTS SUCH AS GEARBOX CASTINGS. I AM FINDING OTHER THINGS TO USE IT FOR, LIKE THIS GOPRO CAMERA MOUNT.

Click to expand...

Just getting ready to buy 3D printer for this type of purpose. Also I have 45,000 hours of UG NX experience so, if willing, I'd be interested in the CAD model you have of this mount.