VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Education > Builder Website Links
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-26-2018, 08:30 PM
RonS RonS is offline
 
Join Date: Nov 2018
Location: Roswell, GA
Posts: 1
Smile https://ronslosberg.com/ Ron's RV-14A Build Log

I just started my RV-14A build. Please visit my build log at https://ronslosberg.com/. Constructive comments appreciated.

Ron
__________________
Ron Slosberg
Roswell, GA
RV-14A - Empennage

Build Log: https://ronslosberg.com
Reply With Quote
  #2  
Old 11-26-2018, 10:27 PM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 14,374
Default Welcome to VAF

Ron, welcome aboard the good ship VAF
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #3  
Old 11-27-2018, 05:37 AM
rvmv rvmv is offline
 
Join Date: Nov 2017
Location: Marietta, GA
Posts: 44
Default reusing paint solvent

The priming you've done looks good. If you will put your dirty lacquer thinner into a container the paint will usually settle out. Then you can pour off and reuse the clear stuff. I use mason jars because they seal well and you can see when the solvent becomes clear. I've never used the paint you are using but it works on everything I've used. Good luck with your project.
Reply With Quote
  #4  
Old 11-27-2018, 06:54 PM
mturnerb mturnerb is offline
 
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 767
Default

Blog looks great. I remember when my shop looked as neat as yours. Not so much these days, but I'm a LOT closer to flying.

Enjoy the build!
__________________
Turner Billingsley
RV-14A In Progress
N14VB Reserved
https://turnerb14a.blogspot.com/
Reply With Quote
  #5  
Old 11-27-2018, 11:45 PM
VD919 VD919 is offline
 
Join Date: Nov 2016
Location: Connecticut
Posts: 18
Default Workspace looks great

Congrats on strarting and looks like a comfortable workspace.
__________________
Vin
RV14 Planning Phase
Pd Dues 2018
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:53 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.