I am questions myself of fuel floats. The RV14 kit comes with 2 fuel sensor boxes. One was marked right and other left.
Seems easy. And the plans are always the left only.
When the wing is in the upright position meaning the float would be down if empty what should the reading be on the sensor? I assume with no power I would be measuring ohms.
Could the boxes be mis-marked?
And if they are opposite will Advanced flight 5600 flip high to low / low to high?
Thanks, Larry
Seems easy. And the plans are always the left only.
When the wing is in the upright position meaning the float would be down if empty what should the reading be on the sensor? I assume with no power I would be measuring ohms.
Could the boxes be mis-marked?
And if they are opposite will Advanced flight 5600 flip high to low / low to high?
Thanks, Larry