Don Patrick
Well Known Member
Wondering if anyone has had this problem.
I havent started the engine yet, however, after wiring all of my engine firewall forward items up some time ago, I was reading everything correctly. More specifically, I was reading the ambiant temperature of the hanger.
For some reason today, I noted that all of the Cht's and Egt's were reading -99?
The only wiring change I have made was to splice into the power line to the red cube (pin 15 of db 37) so that I would have the power to both of the Dynon Capacitance-to-Voltage Converter, where i have wired them up to Pin 20 and 21 and then the grounds.
A little perplexed to say the least.
I disconnected the battery and the connectors in the back of the Dynon to no avail.
Suggestions?
I havent started the engine yet, however, after wiring all of my engine firewall forward items up some time ago, I was reading everything correctly. More specifically, I was reading the ambiant temperature of the hanger.
For some reason today, I noted that all of the Cht's and Egt's were reading -99?
The only wiring change I have made was to splice into the power line to the red cube (pin 15 of db 37) so that I would have the power to both of the Dynon Capacitance-to-Voltage Converter, where i have wired them up to Pin 20 and 21 and then the grounds.
A little perplexed to say the least.
I disconnected the battery and the connectors in the back of the Dynon to no avail.
Suggestions?