What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

RV-10 JimD Repeat Offender (RV-6 Flying Since 08)

Jimd

Well Known Member
Hi Guys,

Thought I would start a build thread. I have been posting youtube videos of my progress including little tips and some 3D printed "tools" and just plain build updates. I started creating the videos as a way to document my progress.

Here is a link to my latest video (July 11th, 2018), it happens to involve 3D printed drill guides for center punching the holes on torque tubes.

https://youtu.be/Q3wXLSmzuB0

Here is the link to the files on Thingiverse

https://www.thingiverse.com/thing:2998644

Jim D (RVJimD on Youtube)
 
I have been watching your videos. Good job. I built my torque tube today and installed it. All set at 91.4 degrees. Allen
 
Back
Top