vfrazier
Well Known Member
Hey F1 Rocketeers,
I need a gear leg socket reamer. I'd just buy a new one... if they were available for anything less than the custom made price of over $600 each!!
If you built your Rocket, you'll recall that you needed a tapered reamer to clean up the weld bumps inside your gear leg sockets.
The reamer in question is an odd size: 4 1/2 Morse taper.
Mark Frederick had several reamers that were lent on a rotating basis. SOMEONE out there has one of these reamers. Maybe several guys.
C'mon, you aren't ever going to need it again. I'll pay the shipping and not ask any questions if you'll just send me one!! When I'm done, I'll return it to Mark.
Or ship it anonymously to: Vince Frazier, 3965 Caborn Road North, Mount Vernon, IN 47620
I need a gear leg socket reamer. I'd just buy a new one... if they were available for anything less than the custom made price of over $600 each!!
If you built your Rocket, you'll recall that you needed a tapered reamer to clean up the weld bumps inside your gear leg sockets.
The reamer in question is an odd size: 4 1/2 Morse taper.
Mark Frederick had several reamers that were lent on a rotating basis. SOMEONE out there has one of these reamers. Maybe several guys.
C'mon, you aren't ever going to need it again. I'll pay the shipping and not ask any questions if you'll just send me one!! When I'm done, I'll return it to Mark.
Or ship it anonymously to: Vince Frazier, 3965 Caborn Road North, Mount Vernon, IN 47620