Searched the threads and haven't found the answer to my problem when transmitting. Sometimes my transmission is clear, a lot of times I'm either not getting a sidetone or too loud of a sidetone (hi pitched squeal) that my transmissions become garbled. I'm still investigating and have talked to Garmin, still no solution.
The configuration setup in the GTN under com my settings are as follows:
Com RF squelch: 0% default and have tried 10% no change
Mic gain: +12 dB default
Sidetone Vol: 91 (-17.5 dB) default-have tried other settings also
Sidetone source: "Internal" per Garmin
What have others have used for these settings that has worked?
More Info:
RV9a, GMA 240 audio panel, Com 1=GTN650; Com 2=Icom 210
Ant for Com 1=top turtleneck mounted Cl-121C
Ant for Com 2=bent whip belly mounted Cl-122
Ant Coax=RG400
Never had a problem with my single Icom radio and removed PSEng intercom!
Thanks
Jim
The configuration setup in the GTN under com my settings are as follows:
Com RF squelch: 0% default and have tried 10% no change
Mic gain: +12 dB default
Sidetone Vol: 91 (-17.5 dB) default-have tried other settings also
Sidetone source: "Internal" per Garmin
What have others have used for these settings that has worked?
More Info:
RV9a, GMA 240 audio panel, Com 1=GTN650; Com 2=Icom 210
Ant for Com 1=top turtleneck mounted Cl-121C
Ant for Com 2=bent whip belly mounted Cl-122
Ant Coax=RG400
Never had a problem with my single Icom radio and removed PSEng intercom!
Thanks
Jim