All,
I would like to borrow an environmental splice crimper for Raychem D-436 barrels. These are the barrel connectors referenced in the installation manual for splicing signal wires.
I think they are TE Connectivity AD-1337 or DMC GMT232 model crimpers. I have a DMC AFM8 and that won't cut it for this.
Does anyone have one laying around I could use for about 2 weeks? I would gladly pay 2 way shipping and put down a deposit if needed.
I'm trying to finish up my last bit of avionics wiring between the GTN / G5 / G3X.
Thanks in advance
Chris
I would like to borrow an environmental splice crimper for Raychem D-436 barrels. These are the barrel connectors referenced in the installation manual for splicing signal wires.
I think they are TE Connectivity AD-1337 or DMC GMT232 model crimpers. I have a DMC AFM8 and that won't cut it for this.
Does anyone have one laying around I could use for about 2 weeks? I would gladly pay 2 way shipping and put down a deposit if needed.
I'm trying to finish up my last bit of avionics wiring between the GTN / G5 / G3X.
Thanks in advance
Chris
