Stockmanreef
Well Known Member
Got word back from Vans. I was shipped HS-706 in the empennage kit instead of VS706. The only difference between the parts is shown in the picture below:
You can see the the flange of the VS-706 is flat along the entire edge, while the HS-706 has the dip at some point along the flange edge where the width of the flange decreases.
I have no idea if the two parts are the same dimensions otherwise. When I get the VS-706 I will post more information.
You can see the the flange of the VS-706 is flat along the entire edge, while the HS-706 has the dip at some point along the flange edge where the width of the flange decreases.
I have no idea if the two parts are the same dimensions otherwise. When I get the VS-706 I will post more information.