Source of Reference Sheet

I pulled the page shown below (front and back) from somewhere when I started my build in 1998. I have used it as a easy reference for the 8 years of building. It has been clipped to my work bench ever since and getting pretty tattered. I can't remember where I pulled this from. I thought from Vans RV-6A instructions manual but page format does not match. See the bottom shows it was page 43 and 44 and recommend to remove for reference. I am guessing it came from Cleveland or Avery tool catalog.

Can anyone verify the source?
I would like to get a fresh copy of this if anyone has one of the old catalogs and can scan and send to me. Kind of like a old familiar tool.

The latest Van's Section 5 has some of this information, including images that look like they came out of Tony Bingellis books.
https://www.vansaircraft.com/faq/section-5-general-information/

You can find the drill sizes on line. Here's an example.

Dave

Avery tools catalog?

Wasn't this at the back of the Avery Tools catalog? I have a version I laminated in the hangar.

It definitely looks like an old Avery page. I found it on the wayback machine.

Sorry for the misstep with the Vans comment.

I actually, use a nice B size poster from Cleveland Tools.

Thanks much

BillL said:

It definitely looks like an old Avery page. I found it on the wayback machine.
.

Click to expand...

Happy day. I can now retire my tattered one (it is going into my RV building archive collection) and replace with new one attached to my tool box.

How quickly Avery grew. My sheets probably came from a catalog in 1998 and those pages were on 43-44. The link above was for the 2002 catalog and on pages 70-71. About doubled their products in 4 years.