Page 24-05 Rev 2 (which I believe is current rev) shows 3x SB-375-4 bushing at lower end of F-1207D-L baggage bulkhead channel per Figure 1. My channel has only 2 holes one is for SB-375 and the other is 0.75 which would be for SB 750 bushing. Has anyone else noted this and is this the correct channel with these two bushings versus what is shown on the drawing? My kit was delivered in 2015 so it is newer than drawing rev. Figured I'd ask the experts before I can call Vans next week after holiday. I'll also try and figure out from plans what goes through which might answer the question. As always thanks for the help and wishing everyone a Happy New Year!