I have an ECI 90 degree oil filter adapter for my paralell valve io-360 along with the SD-20 alternator for my RV-8.
There is a fitment issue with the adapter and the engine mount so I'll need a spacer. B&C told me I would need a 1.4" spacer for the filter. Unfortunately, ECI is backordered on that spacer for 6 months.
My question is can anyone verify the 1.4" spacer does work with the oil filter/sd-20/engine mount before I wait out the 6 months for the part? Is there another spacer dimension that is known to work? Does anyone have any suggestions on tracking down this spacer outside of the normal distributor channels?
Thanks.
There is a fitment issue with the adapter and the engine mount so I'll need a spacer. B&C told me I would need a 1.4" spacer for the filter. Unfortunately, ECI is backordered on that spacer for 6 months.
My question is can anyone verify the 1.4" spacer does work with the oil filter/sd-20/engine mount before I wait out the 6 months for the part? Is there another spacer dimension that is known to work? Does anyone have any suggestions on tracking down this spacer outside of the normal distributor channels?
Thanks.