VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > RV Firewall Forward Section > Propellers
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 11-13-2018, 12:17 PM
smithflys23 smithflys23 is offline
 
Join Date: Feb 2017
Location: Jupiter
Posts: 69
Default

Quote:
Originally Posted by jpowell13 View Post
The Bruce cover was not on the web site. I had to take some measurements for them. Mine fit well and looks great, but could have benefitted from an extra 1/2" of overall length. I have a 6A. My name is John R Powell if you want to reference my cover.

My old aluminum prop now hangs on the wall of my den. It's a good way to display my wife's "swag" from her runs. Use strong screws if you do the same. Those old props are heavy. John

Thanks, John. Could you post a picture of the prop cover. Thanks again.
Reply With Quote
  #12  
Old 11-13-2018, 03:29 PM
sibriggs sibriggs is offline
 
Join Date: Nov 2014
Location: Concord, NH
Posts: 157
Default

Thanks, for the replay, I just don't want to pull the prop off and ship it to Florida, If I lived down that way I'd drive it over.

Steve
__________________
Steve Briggs. RV9, G3x, G5, VPX, GTN625, A&P, IA, CFII
Reply With Quote
  #13  
Old 11-13-2018, 05:51 PM
terry.mortimore terry.mortimore is offline
 
Join Date: Jul 2008
Location: Sault Ste Marie, Ontario Canada
Posts: 204
Default

Quote:
Originally Posted by sibriggs View Post
Hi Terry, I saw your old note regarding the prop pin drawings from Sensenich.
Any chance you still have the drawings and could forward me a copy.

I ran out of cruise pitch on the pins supplied by Sensenich and had to use a prop protractor to get additional pitch. I want to avoid sending it back to Florida to have it re-indexed to use the pins I currently have. So it sure would be nice to have some 8 and 9 pins.

Thanks, Steve Briggs in NH N43EV RV9 150hrs.

Hi Steve, Iíve forwarded the drawing from Sensenich. Let me know if you receive it ok.

Terry
__________________
Terry Mortimore
RV-6A flying
Based CYAM
Reply With Quote
  #14  
Old 11-14-2018, 12:50 PM
jpowell13 jpowell13 is offline
 
Join Date: Nov 2008
Location: Baton Rouge, LA
Posts: 579
Default Prop cover

Here's that Bruce prop cover picture for the Sensi GA prop. John

Reply With Quote
  #15  
Old 11-14-2018, 04:56 PM
smithflys23 smithflys23 is offline
 
Join Date: Feb 2017
Location: Jupiter
Posts: 69
Default

Nice! Thanks for the pic
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:25 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.