-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

11-08-2018, 11:46 PM
|
|
|
Join Date: Jan 2016
Location: Southwest
Posts: 602
|
|
Painting Interior before dimpling
Hi all,
I am getting ready to paint my interior before assembly but ran into a dilema. I normal prime before dimpling, and I was going to do the same when I paint. But it occurred to me that the dimpling process may mess up the paint around the rivets. Do you guys (and gals) recommend I dimple before prime/paint, or can I dimple after prime/paint without tweaking the fresh paint? I am using Sherwin williams jetflex, so it will be pretty tough paint.
Thanks
__________________
John S
WARNING! Information presented in this post is my opinion. All users of info have sole responsibility for determining accuracy or suitability for their use.
Dues paid 2019, worth every penny
RV9A- Status: tail feathers done less tips
Wings done less tips and avionics
Fuselage 30%
www.pilotjohnsrv9.blogspot.com
|

11-09-2018, 05:59 AM
|
 |
|
|
Join Date: Mar 2006
Location: Newport, TN
Posts: 7,136
|
|
Quote:
Originally Posted by PilotjohnS
Hi all,
I am getting ready to paint my interior before assembly but ran into a dilema. I normal prime before dimpling, and I was going to do the same when I paint. But it occurred to me that the dimpling process may mess up the paint around the rivets. Do you guys (and gals) recommend I dimple before prime/paint, or can I dimple after prime/paint without tweaking the fresh paint? I am using Sherwin williams jetflex, so it will be pretty tough paint.
Thanks
|
Some epoxy primers can survive dimpling but I doubt any paint will.
|

11-09-2018, 06:28 AM
|
|
|
Join Date: Feb 2005
Location: LSGG
Posts: 2,429
|
|
dimple first
I'd dimple first - is there a reason you want to delay dimpling until after paint?
|

11-09-2018, 09:36 AM
|
 |
|
|
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 3,115
|
|
Dimple then paint
I dimple before paint. My interior parts were all painted before assembly so the rivets woul show. Jet Flex SB.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/27/2018. Plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 05:26 PM.
|