What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

3D printed hinge cover

A5555

Well Known Member
3D printed canopy hinge cover

A friend asked for a RV-14 canopy - top deck hinge cover over the phone but I don't know the design space. I tried to make something that could work but could use some dimensions and advice. The good thing about ABS is that it will not scratch paint. It's a quick 30 minute print.

snap1_zpsnpo9hffq.png


snap4_zpszpakl4ej.png


snap2_zpsocp9vfbv.png


snap3_zpsdrecdwas.png
 
Last edited:
Back
Top