fabricflyer
Well Known Member
Tungsten! We don't need no Stinkin' Tungsten Bucking Bar! Yea, I love my tungsten bucking bar, but sometimes you have to make a custom one to reach certain spots. This one is especially effective at reaching the rivets on the AFT Canopy Deck (F721B), in particular, the rivets close to bulkhead F-705. I can rearrange the long bars to work on the left or right side of fuselage. There have been several spots where it has fit the bill.
If you have made one for a particular purpose, give us a shot of it and where it was used.
If you have made one for a particular purpose, give us a shot of it and where it was used.
Last edited: