Brendan03801
Member
Hi all. I'm working with plans rev. 1/2/14.
On page 15-02, step 10, it appears I should install a single nut plate on one of my three untrimmed W-1208-R Nose Ribs.
On page 15-05, step 2, I am to use an untrimmed W-1208-R nose rib with two attached nut plates. (This is the furthest inboard W-1208-R.)
Which page is right?
BTW I believe earlier versions of the plans called for a rib with three attached nut plates.
On page 15-02, step 10, it appears I should install a single nut plate on one of my three untrimmed W-1208-R Nose Ribs.
On page 15-05, step 2, I am to use an untrimmed W-1208-R nose rib with two attached nut plates. (This is the furthest inboard W-1208-R.)
Which page is right?
BTW I believe earlier versions of the plans called for a rib with three attached nut plates.