wyoflyer
Active Member
Guys,
I am building an RV-4 (circa 1989) and am constructing the firewall. The 3/4 x 3/4 .125 angle that runs around the perimeter and reinforces the firewall needs to be cut and I would like to know if anybodyremembers which piece of angle I use to cut these. I have six pieces.....
2 that are 170"
2 that are 130"
1 that is 72"
2 that are 31"
Obviously the 2 170" ones are the main longerons....anybody know which ones to cut for the firewall?
I am building an RV-4 (circa 1989) and am constructing the firewall. The 3/4 x 3/4 .125 angle that runs around the perimeter and reinforces the firewall needs to be cut and I would like to know if anybodyremembers which piece of angle I use to cut these. I have six pieces.....
2 that are 170"
2 that are 130"
1 that is 72"
2 that are 31"
Obviously the 2 170" ones are the main longerons....anybody know which ones to cut for the firewall?
