What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Setting up normal values in engine instruments

D

Dorfie

Well Known Member
I am looking for a source for the engine parameters (oil press, fuel press etc) for the IO-540-C4B5 engine. I need this to set up the yellow/green/red zones of the engine indications.
Thanks.
Johan
 
Thank you.

Where is oil temp measured in the C4B5 engine. Before or after cooler? The data sheet that "jabarr" attached only mentions INLET oil temp. Not sure inlet to where.
Thanks.
Johan
 
Dorfie said:
Where is oil temp measured in the C4B5 engine. Before or after cooler? The data sheet that "jabarr" attached only mentions INLET oil temp. Not sure inlet to where.
Thanks.
Johan
Click to expand...

Right in front of the oil filter. I highly recommend you download a copy of the Lycoming (I)O-540 operators manual, overhaul manual, and parts catalog as part of your library.
 
Last edited:
You must log in or register to reply here.
Back
Top