I was considering putting fiberfrax on the engine side of the firewall with a thin layer of steel over it to protect and keep it in place as was recommended in some other threads. I had read several people say they wish they did this before mounting items on the firewall (such as battery tray, contactors, etc.). They also talked about creating quarter inch stand-off's for these items. My question is how would mounting these items on 1/4" stand-offs effect the integrity of their mounting? I am concerned that it would compromise the security of them. For instance, the battery tray is currently flush on the firewall and bolted in three locations, if each of those bolts had a quarter inch stand off behind them it would not seem as stable.
Could you guys please give me your opinion on this? it would be nice to hear from someone who has actually used the stuff or researched it as well. Thanks.
Matt
Could you guys please give me your opinion on this? it would be nice to hear from someone who has actually used the stuff or researched it as well. Thanks.
Matt