Local grounds for boost pump and Red Cube?

R

rightrudder

Well Known Member

• Nov 5, 2014

• #1

Hi guys,

I'm curious as to what others have done for these components (boost pump is for fuel-injected engine). It's getting a little crowded in the 5/8" conduit to the instrument panel, so going local could save a wire or two. Thanks!

 

F

flyinga

Well Known Member

• Nov 5, 2014

• #2

I used local grounds for both on my RV8. 350 hrs with no problems.

 

R

rightrudder

Well Known Member

• Nov 5, 2014

• #3

Thanks. Will help to simplicate and add lightness.

 

Dbro172

Well Known Member

• Nov 5, 2014

• #4

I ended up with very few local grounds but the fuel pump was one. I think the flap motor was the other.