VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 08-23-2019, 02:22 PM
atalla atalla is offline
 
Join Date: Jul 2014
Location: Whistler BC
Posts: 207
Default Aluminum bending brake for aircraft parts

Hello all
I was having trouble figuring out how to bent the lower leading edge to my elevator trim tab and came up with this. Let me know what you think! https://youtu.be/Uuoi_ZGb_p0
__________________
Andrew Atalla
Red Seal Automotive Service Technician
Red Seal Heavy Duty Equipment Service Technician
Welder/Fabricator
Squamish BC CYSE
RV-7 Left Elevator in progress
Dues paid
Reply With Quote
  #2  
Old 08-23-2019, 06:31 PM
Girraf Girraf is offline
 
Join Date: Dec 2017
Location: Southern Maryland
Posts: 132
Default

Quite fancy. Let us know if you come across other times it was handy to have. I went far more low tech and bent that portion of the tab with my hands.
__________________
RV-7:
Empennage complete!
Wings in progress
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:48 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.