IowaRV9Dreamer
Well Known Member
This is a picture of the case of my O-320-E2A. It was originally carb'd 150 HP and I want to build it for 160 HP with fuel injection. I plan to send the case to Divco - and was thinking of having new through bolts installed.
I think only the center bolts two are free floating - the remaining four appear to be fixed, with two in one side and two in the other. Do I have that correct? If so, I would want Divco to remove and replace them, correct?
Thanks for any info!
I think only the center bolts two are free floating - the remaining four appear to be fixed, with two in one side and two in the other. Do I have that correct? If so, I would want Divco to remove and replace them, correct?
Thanks for any info!