I need to increase the size of the ducting to my remote oil cooler from 3" to 3.5"
or 4"
looking for a source for SCAT hose and flange. No luck at ACS.
Dick
That seems strange to me since I am using a single 2" duct about 36" long and have plenty of cooling even on hot days. Are you sure the lack of inlet air is the problem? Could the the outlet be the problem? (High compression O-290-D2 here.)
Just did that change myself, 3" to 4" SCAT, made all the difference in the world on my oil temps. I got the SCAT from VANS and the flange and clamps from ACS.