bpattonsoa
Well Known Member
I just finished my Rans S-20 and have a hanger issue. While I am in Phase one and perhaps later I want to put the -10 in the back of the 44 X 50? hanger. Pulling the-10 out to the taxiway and then the Rans and then putting the -10 back to fly and then repeating it after the day is a real PITA.
There is a storage and bathroom in the back that along with built in workbenches makes it impossible to maneuver the -10 into position. However with the -10 on wheel dollies it can be done.
I found the GoJak Aviation 4107 which might work. Does anyone have experience with them, especially with a -10 or-14 and their big pants? Perhaps another dolly?
https://zendextool.com/product/gojak-g4107/
There is a storage and bathroom in the back that along with built in workbenches makes it impossible to maneuver the -10 into position. However with the -10 on wheel dollies it can be done.
I found the GoJak Aviation 4107 which might work. Does anyone have experience with them, especially with a -10 or-14 and their big pants? Perhaps another dolly?
https://zendextool.com/product/gojak-g4107/