I'm in the process of setting values for my Dynon EMS, ie Red/Yellow/Green values for things like oil pres, oil temp, cht's etc.
I know how to set them, and I know what the Low, High and Normal values are, these can all be gotten from Lycoming etc.
The question is what values do I use for the Green/Yellow areas spefically. Some percentage of total?
For instance, assume max is 100 min is 20. Above 100 is obviously Red and below 20 is Red. What's Greeen/Yellow? Green 30 to 90, Yellow in between?
Is there some general rule to follow?
Thanks, Larry
I know how to set them, and I know what the Low, High and Normal values are, these can all be gotten from Lycoming etc.
The question is what values do I use for the Green/Yellow areas spefically. Some percentage of total?
For instance, assume max is 100 min is 20. Above 100 is obviously Red and below 20 is Red. What's Greeen/Yellow? Green 30 to 90, Yellow in between?
Is there some general rule to follow?
Thanks, Larry