VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 06-21-2008, 07:56 PM
detlef lili detlef lili is offline
 
Join Date: May 2005
Location: Albuquerque
Posts: 163
Default No Audio from my GMA 347

Hello!
I have one GNS430W a VAL760CM and a GMA347. I wired all together and double checked the wiring. The intercom works perfect. Since I want to test the COM, I see only the RX and TX sign in the GNS-430W display but I hear nothing and my hand held transceiver shows me only the TX sign if I transmit and no voice.

What should I do at first?

Best regards
__________________
Detlef Heun
FAA A&P / EASA CFI
RV-7 N577DL 680 hours on Car Gas, sold
RV-7A N962JG 40h
Annual Fee 2016 proudly paid
Reply With Quote
  #2  
Old 06-21-2008, 09:34 PM
Sticky1's Avatar
Sticky1 Sticky1 is offline
 
Join Date: Oct 2007
Location: NY
Posts: 323
Default hummmmmm

Did u run the set-up software for the Garmin Audio panel....?
Reply With Quote
  #3  
Old 06-21-2008, 10:42 PM
AltonD's Avatar
AltonD AltonD is offline
 
Join Date: Sep 2005
Location: Dothan, Alabama
Posts: 1,474
Default

My understanding from Stark is that even if you do not want to change a single setting, you must run the setup software one time.
__________________
Alton DeWeese
N526RV RV7A Tip Up, IO360 180 W/Hartzel BA prop.
Flying ~900 hours since Aug 2010
N4IDH

Construction Log
“The secret of getting ahead is getting started. The secret of getting started is breaking your complex overwhelming tasks into small manageable tasks, and then starting on the first one.”

Mark Twain
Reply With Quote
  #4  
Old 06-22-2008, 07:10 AM
detlef lili detlef lili is offline
 
Join Date: May 2005
Location: Albuquerque
Posts: 163
Default

Quote:
Originally Posted by AltonD View Post
My understanding from Stark is that even if you do not want to change a single setting, you must run the setup software one time.
Thank you for the quick answer, to STICKY1, too!

I thought, that I have only to do this, if I want to change the settings later. I have no software to change the settings, where can I get it from?

I tried Garmin support, but I could not found an answer.

Best regards
Detlef
__________________
Detlef Heun
FAA A&P / EASA CFI
RV-7 N577DL 680 hours on Car Gas, sold
RV-7A N962JG 40h
Annual Fee 2016 proudly paid
Reply With Quote
  #5  
Old 06-22-2008, 08:02 AM
AltonD's Avatar
AltonD AltonD is offline
 
Join Date: Sep 2005
Location: Dothan, Alabama
Posts: 1,474
Default

check your email.
1. I have never used the software. Mine was setup by the avionics tech.
2. You will need to run out the serial conection from the 347.
__________________
Alton DeWeese
N526RV RV7A Tip Up, IO360 180 W/Hartzel BA prop.
Flying ~900 hours since Aug 2010
N4IDH

Construction Log
“The secret of getting ahead is getting started. The secret of getting started is breaking your complex overwhelming tasks into small manageable tasks, and then starting on the first one.”

Mark Twain
Reply With Quote
  #6  
Old 06-22-2008, 04:33 PM
detlef lili detlef lili is offline
 
Join Date: May 2005
Location: Albuquerque
Posts: 163
Default I got the email

Quote:
Originally Posted by AltonD View Post
check your email.
1. I have never used the software. Mine was setup by the avionics tech.
2. You will need to run out the serial conection from the 347.
Thank you Alton!

I got the email and will try it tomorrow.

Detlef
__________________
Detlef Heun
FAA A&P / EASA CFI
RV-7 N577DL 680 hours on Car Gas, sold
RV-7A N962JG 40h
Annual Fee 2016 proudly paid
Reply With Quote
  #7  
Old 06-25-2008, 04:13 PM
detlef lili detlef lili is offline
 
Join Date: May 2005
Location: Albuquerque
Posts: 163
Default It works!

Hi Alton!

The problem is solved. You must activate the settings.

Thanks again for your help.

Best regards and may be we will meet you anywhere.

Best regards

Detlef::
__________________
Detlef Heun
FAA A&P / EASA CFI
RV-7 N577DL 680 hours on Car Gas, sold
RV-7A N962JG 40h
Annual Fee 2016 proudly paid
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:10 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.