VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 11-06-2018, 07:47 AM
alenovo alenovo is offline
 
Join Date: Nov 2018
Location: London
Posts: 1
Default Experimental kit airplane in europe

Hi, im new here. nice forum! i wanted to ask a few questions on experimental kits i have. Ive been doing some online research without success.

Im looking to own an airplane and my mission is to tour europe. im looking to do this at 140-150 kts in a 4 seater airplane

Im eu citizen and i have a spanish PPL EASA.

Because of the nature of my job i tend to move within EASA . Ive been living in uk for 2.5yrs and now ive been in Germany for 6 months.
I dont know where i might relocate in the future

ive looked at Arrows and Mooneys buy its hard to find something good that you dont have to rebuild the engine after purchase.

lately ive being looking at the experimental scene, specially the Vans RV10 and Sling 4 TSI
Also because one of my life dreams and goals would be to build an airplane.

Regarding regulations, what are those in Europe?

If i buy a RV10 or sling 4 kit, (or quickbuild possibly) build it, and register it in spain/germany/uk
Can i fly internationally within EASA?
Can i fly night time?
Can i fly IFR?
Can i fly outside EASA?
What are the benefits regarding maintenance? is the owner/pilot able to conduct its own maintenance? (one of the mayor benefits of experimental in EEUU)

What other limitations are there to know?

thanks again.
Reply With Quote
  #2  
Old 11-06-2018, 09:02 AM
control control is offline
 
Join Date: Feb 2006
Location: Stockholm, Sweden
Posts: 551
Default

If i buy a RV10 or sling 4 kit, (or quickbuild possibly) build it, and register it in spain/germany/uk
Can i fly internationally within EASA? In most but not all EASA contries
Can i fly night time? I think but are not 100% sure that the answer is yes for all contries that allow experimentals now
Can i fly IFR?In several but far from all EASA contries
Can i fly outside EASA?Yes but the rules vary a lot
What are the benefits regarding maintenance? is the owner/pilot able to conduct its own maintenance? (one of the mayor benefits of experimental in EEUU)This is very dependant on your country of registration, in some contries it is builder or certified mechanic only, in others owners can do it after education and supervised practice

What other limitations are there to know?For this you should contact the EAA/LAA in the countries that you consider

Welcome here and good luck!
__________________
RV-14 kit #140138
I have entered the 90% done, 90% left to do zone
Http://magnusrv.blogspot.se
Reply With Quote
  #3  
Old 11-06-2018, 11:21 AM
flyingRV flyingRV is offline
 
Join Date: Apr 2018
Location: Hamburg, Germany
Posts: 10
Default

Hi,

as I‘m also in the process of figuring out what to build and I asked myself some of the same questions.
The answer to most of them...“It depends“.
As every country regulates the experimentals/homebuilds seperately they have the right to decide what’s allowed and what‘s not.
In Germany for example:

You have to build it there and it‘s not possible to register an experimental which was built abroad.

4 seater require a special certfication and some parts of the airplane have to be certified themselves. Same applies to IFR.

I don‘t have he answer for every country but I checked the AIPs of some of our neighbours. I‘m also in Germany. Most of the countries accept foreign registered experimentals without special permission required but most of the them just daylight and VFR only. So IFR/night travelling through Europe seems to be difficult.

I guess you have to do some research for every country which comes into consideration. Here the EAA is called OUV.

Good luck
Reply With Quote
  #4  
Old 11-06-2018, 11:39 AM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 14,311
Default Welcome to VAF

Quote:
Originally Posted by alenovo View Post
Hi, im new here. nice forum!
Alejandro, welcome to VAF
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #5  
Old 11-06-2018, 12:13 PM
Mark Albery's Avatar
Mark Albery Mark Albery is offline
 
Join Date: Jul 2007
Location: Fremont CA
Posts: 648
Default

It's important to remember that experimental 'certification' is specific to the country of registration. The ICAO freedoms only strictly apply to standard certified aircraft.

Within Europe there is relatively free movement according to the ECAC agreement, though for a few countries (e.g. Spain, Portugal, Iceland) you need to apply for an individual permission to fly a foreign homebuilt.

Annual inspection and re-validation will usually be done in the country of registration.

RE-location to another country is usually limited to a few weeks at a time, any longer will usually require applying for exemption or re-registration to that country.

Some countries (France comes to mind) are resistant to imported homebuilts. It probably helps if you are the builder.

Most countries will restrict you to day/vfr although there is some evidence of that becoming less restrictive, but you are bound by the rules of the country where you are flying.

Flying to non-ECAC countries is perfectly possible if you do the paperwork. There are many homebuilt aircraft that have completed round-the-world flights.

Maintenance requirements also vary country to country. Sweden have a system similar to the US, UK requires work to be signed off by an approved inspector except for minor items like a 50 hour check.
Reply With Quote
  #6  
Old 11-07-2018, 01:11 AM
selaburdy selaburdy is offline
 
Join Date: Jun 2014
Location: Rosenheim, Germany
Posts: 13
Default

If i buy a RV10 or sling 4 kit, (or quickbuild possibly) build it, and register it in spain/germany/uk => YES
Can i fly internationally within EASA? => YES
Can i fly night time? => only with certified engine / prop / avionic
Can i fly IFR? => only with certified engine / prop / avionic
Can i fly outside EASA? => YES
What are the benefits regarding maintenance? is the owner/pilot able to conduct its own maintenance? (one of the mayor benefits of experimental in EEUU) => YES

IFR / night is with german registration possible but now only with certified parts. For this question would be good to ask the German LBA directly.

with Swedish registration IFR / night is possible but you must have an inspector for the annual check nearby.

take care and good luck.
__________________
Johannes Reiser
RV7A N959JR
pilot since 2008, IFR FAA 2012, IFR EASA 2015
based in EDMY
Reply With Quote
  #7  
Old 11-07-2018, 03:22 PM
penguin penguin is offline
 
Join Date: Jan 2005
Location: England
Posts: 1,047
Default

Quote:
Originally Posted by alenovo View Post
Regarding regulations, what are those in Europe?

If i buy a RV10 or sling 4 kit, (or quickbuild possibly) build it, and register it in spain/germany/uk
The rules in each country are different. Homebuilts are not EASA aircraft and so are nationally regulated. In general you must contact the homebuilders' association in each country.

Quote:
Can i fly internationally within EASA?
Yes, but ... Some countries, for example Spain & Portugal, insist you obtain permission before you travel. Belgium used to charge 90 Euro per visit (most avoided), charge now dropped. In most countries you may only stay for 28 days in any one year. Rules differ, check with your homebuilders' association.

Quote:
Can i fly night time?
Depends on the country where you are registered/certified.
In UK only once the aircraft has been through a specific approval process. Some counties do not permit other than day/VFR flight by homebuilts.

Quote:
Can i fly IFR?
Same as night, often aircraft by aircraft approval required.
Some counties do not permit IFR/IMC flight by homebuilts.

Quote:
Can i fly outside EASA?
Yes, see comments above on international travel. As the aircraft is nationally (not EASA) certified then any international travel is to the same rules.

Quote:
What are the benefits regarding maintenance? is the owner/pilot able to conduct its own maintenance? (one of the mayor benefits of experimental in EEUU)
Usually owner can carry out all maintenance with over sight from local inspector/A&P. Parts do not have to be certified. Rules differ between individual countries. Important to decide which country's rules you will build/operate under. Best to buy an aircraft from the country where you will operate. It is possible to import aircraft, but time consuming. Importing from US is usually very time consuming.

My advice is ensure you understand the rules of the country where you will be based before committing any money to an aircraft. It is possible to have to carry out substantial work, for example an engine overhaul, to meet local rules.
Reply With Quote
  #8  
Old 11-09-2018, 11:23 AM
JoopSJ's Avatar
JoopSJ JoopSJ is offline
 
Join Date: Dec 2016
Location: The Netherlands
Posts: 16
Default

As you can read here, the biggest take away is that everything depends on the country of registration. There is no consensus within EASA and that's why homebuild falls under the National regulation.

But the general rule is that flying homebuilds is very restricted. Sweden and UK made some progress by allowing IFR operations. But that same UK has very strict rules for building the acft. If you want to put a mount for your go-pro in the cockpit, you need permission. I am not kidding.

Looking at your use case/ ambition I would definitly consider buying a certified one. Buy one in the US and leave it N registred. That will give a lot of cost advantage compared to EASA reg.

Don't forget that you need to add at least 30% to all the advertised prices you see for the kit, parts, tools avionics while building your experimental. That money might open some opportunities for acquiering a certified. Buy it in the US and fly it to EUR.
__________________
Empennage ... Done
Working on the wings
Donation 2017/2018 . . . Done.
Board Member NVAV (EAA chapter 664 - Dutch experimental aircrafts builders)
Member EAA
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:19 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.