Mike D
Well Known Member
Does anyone have a picture of the door pin in both closed and open position?
Seems the pin has 1.25 inch travel, but the blocks are only 0.75 inch deep.
So how do the pins stay in the blocks when open? Do they protrude 3/4 inch when open? If this is the case, how do you get a close seal (fore and aft direction)
Seems the pin has 1.25 inch travel, but the blocks are only 0.75 inch deep.
So how do the pins stay in the blocks when open? Do they protrude 3/4 inch when open? If this is the case, how do you get a close seal (fore and aft direction)