FF-1216 Pitot line - did I do something wrong?
I cut the FF-1216 pitot line to 54.5" as shown on 45a-04, connected it to the Aft Pitot Line where Figure 1 shows and routed it, as best as I can tell, like the figure on 45a-01 shows. That results in a pitot line that's about 20" too long. Better long than short but I hesitate cutting it at the aft end of the pitot tube to connect it there because I don't think I've seen a measurement in the drawings that far off and I wonder what I did wrong or if I did.
Port Orange, Fl
RV-12 N121TK ELSA #120845; first flight 06/10/2015
RV-12 N918EN ELSA #120995 Eagles Nest Project
SPA Panther N26TK in progress