VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > The Never Ending Debate Section > Tools
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-08-2020, 01:59 PM
BCP Boys's Avatar
BCP Boys BCP Boys is offline
 
Join Date: Oct 2011
Location: Kennesaw, Ga
Posts: 785
Default Want to borrow - Paint cutter for painted screws

I need a screw paint cutter to cut around the screws on 1 panel. It has eight #8 screws and four #6 screws. The cutter costs about $25 each and then an arbor is another $25. I was hoping I could borrow a set from someone. Of course I would pay for shipping both ways. The set that has all the sizes at Spruce is $125. I normally buy tools that I don't have but I'm having a tough time justifying $75 for 12 screws but I don't want to miss up my paint

I thought I would try the forums to see if anyone has one they are willing to lend.

Thank you in advance.

AB
__________________
Amir
----------
RV-7
RV-10 - Sold

Supporting VAF since the first visit

Last edited by BCP Boys : 02-10-2020 at 06:28 AM.
Reply With Quote
  #2  
Old 02-17-2020, 03:30 PM
Sue Sue is offline
 
Join Date: Nov 2012
Location: Ok
Posts: 94
Default Cutter

Ones I see are about $12-14?
Reply With Quote
  #3  
Old 02-17-2020, 03:32 PM
Sue Sue is offline
 
Join Date: Nov 2012
Location: Ok
Posts: 94
Default Cutter

Panamerican tool
Reply With Quote
  #4  
Old 02-18-2020, 02:08 PM
BCP Boys's Avatar
BCP Boys BCP Boys is offline
 
Join Date: Oct 2011
Location: Kennesaw, Ga
Posts: 785
Default

thank you for the response. I literally ordered the set from ACS about 2 hours before your post. . Thanks anyway. It's all good. Will have it for the next person that may need one here at that airport or another aircraft owner/mechanic.
__________________
Amir
----------
RV-7
RV-10 - Sold

Supporting VAF since the first visit
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:02 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.