Lan Vinh Do
Well Known Member
is it possible that my matco cylinder is sucking air in my system
This annual, i rebuilt the right brake pilot side on my rv-10 because it was leaking,
I bleed the brake after and i notice that i had air in my left brake line pilot side. It was in the feeding line I bleed the brake again 3 time from bottom up and from up to bottom. ( almost a liter last time to be sure that no bubble was there. ) Everything look fine but as soon as i touch the brake on the left side , i see bubble going up on the feeding side. The brake are not soft but i see air bubble on the feeding line coming from the cylinder.
Is it possible that the cylinder introduce air in my brake line ( feeding side) ? There is no fluid leak
This annual, i rebuilt the right brake pilot side on my rv-10 because it was leaking,
I bleed the brake after and i notice that i had air in my left brake line pilot side. It was in the feeding line I bleed the brake again 3 time from bottom up and from up to bottom. ( almost a liter last time to be sure that no bubble was there. ) Everything look fine but as soon as i touch the brake on the left side , i see bubble going up on the feeding side. The brake are not soft but i see air bubble on the feeding line coming from the cylinder.
Is it possible that the cylinder introduce air in my brake line ( feeding side) ? There is no fluid leak