VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Prev Previous Post   Next Post Next
  #17  
Old 03-08-2018, 09:34 PM
RandyAB RandyAB is offline
 
Join Date: May 2016
Location: St Albert, Alberta, Canada
Posts: 302
Default

Quote:
Originally Posted by daveyator View Post
AN fittings should not use sealant of any type.On NPT fittings, like the ones in the brake cylinders, I would recommend either permatex#2, or loctite 567. Use sparingly on the tapered thread of the fitting.
Cheers,
DaveH
120485
I'm talking about the AN 822 4D fittings that screw into the master cylinders. I used Permatex #2 there. I'm confused by what you've written. In section 5 it states that all threaded fittings (including the AN fittings which have an obvious taper) used on an RV are NPT and thus require sealant.
__________________
______________________
Randy P.
1st time builder
RV10 - Empennage (Started March 2017)
St. Albert, Alberta, Canada
2017 dues paid
Reserved:C-GRPY (GRumPY)

Last edited by RandyAB : 03-08-2018 at 09:44 PM.
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:47 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.