What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

For those with mostly assembled or flying 14s

Bavafa

Well Known Member
On page 10-12, there are some nutplates (two corner type and two in the vertical position) that I cannot figure out what they are used for. These are in the middle section of the F-01406B bulkhead, figure 3.

Just wondering if anyone knows what gets attached to these.
 
2 corner and one straight (K1000).... used to attach the aft flange of the center tunnel cover on the baggage floor.
 
2 corner and one straight (K1000).... used to attach the aft flange of the center tunnel cover on the baggage floor.
Thank you Scott, you are absolutely right. For some reason I thought the tunnel cover shares the same nutplate as the baggage door but it does not.

Do you know if the two vertically positioned are used for anything?

I mainly want to make sure I am not missing anything.
 
Back
Top