petehowell
Well Known Member
It's that time again! Just did the 2100 hr oil change and took a peek at the valves. Oil filter and suction screen had some crumbly carbon bits in them, but no metal I could see. The magnet on the filter had a thin film of micro iron stuff that wiped right off.
Compressions were 77/72/78/77. #2 has shown a bit low before, but typically comes back on the next test.
here are the Exhaust Valves I added some "pop" in Google Photos.....
#1
#3
#2
#4
One intake valve - because I thought the color/pattern was cool.
Compressions were 77/72/78/77. #2 has shown a bit low before, but typically comes back on the next test.
here are the Exhaust Valves I added some "pop" in Google Photos.....
#1
#3
#2
#4
One intake valve - because I thought the color/pattern was cool.