While working in the tail cone of my RV8 (which I did not build) installing the pitch servo, I found a AN310-3 castle nut. It appeared as though it had been rolling around for quite awhile. There also appeared to be some metal in the threads of the nut indicating that it was not just a spare that dropped, but rather it had been installed somewhere.
For you RV8 builders, where could this nut have come from? I have searched through some of the plans for the empennage, but I cannot find any castle nuts in this area.
Thanks,
Jim
RV8 N37PK
For you RV8 builders, where could this nut have come from? I have searched through some of the plans for the empennage, but I cannot find any castle nuts in this area.
Thanks,
Jim
RV8 N37PK