Anyone have trouble installing the four NAS 1304 (I think) 29 close tolerance bolts in the main gear legs that fasten the axles. Holes in my right gear leg are a little undersize (left leg fit tight as needed). I tried an AN-4 bolt and it will not go either. Did send an e-mail to Van's but that will take til middle of next week for an answer.
Anyone know the tolerance for these bolts? I'm doubtful a 1/4" reamer will be called for here, probably something under sized.
Anyone know the tolerance for these bolts? I'm doubtful a 1/4" reamer will be called for here, probably something under sized.