Hello!
I'm 3D printing some Perfect EarthX Battery Adapters for the RV-14's stock battery box, part FF-01403.
These adapters will fill the space beside the EarthX battery as well as provide spacing for the retaining bracket bolts.
I need the dimensions of FF-01403 as well as the size of the lightening holes and their distance to at least two edges. Also, the width of the FF-01403 material would be helpful.
I'll be happy to provide a set of the adapters to anyone who is kind enough to send me the information. I won't be near my 14 until the weekend and wanted to take some prototypes out to test fit.
I'm 3D printing some Perfect EarthX Battery Adapters for the RV-14's stock battery box, part FF-01403.
These adapters will fill the space beside the EarthX battery as well as provide spacing for the retaining bracket bolts.
I need the dimensions of FF-01403 as well as the size of the lightening holes and their distance to at least two edges. Also, the width of the FF-01403 material would be helpful.
I'll be happy to provide a set of the adapters to anyone who is kind enough to send me the information. I won't be near my 14 until the weekend and wanted to take some prototypes out to test fit.
