longeron and F-01234 match drilling
On page 23-02 step 5 the forward edge of the F-01234 needs to be flush with the marked line on the longeron. Before match drilling. I decided to put the outside of the forward edge of the F-01234 flush with the outer point of the line on the longeron. And kept going. But maybe I made a mistake doing it that way?
I choose for this way with the outside edge of the 01234 flush with the marked line on the longeron
RV-12iS, emp, 1 wing, working on the fuselage
Last edited by jcboon : 05-30-2018 at 12:39 PM.