VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 06-13-2018, 07:44 AM
larrys larrys is offline
 
Join Date: May 2017
Location: Colorado Springs
Posts: 98
Default Skin thickness on side of tailcone RV-14?

I need to order an access plate and need to know the skin thickness on the side of the tailcone for the RV-14?
Would someone be next to their build and be able to let me know?
Thanks, Larry
__________________

RapidsetBuildings.com (Hangars)
Advertiser
RV-14 tail, QB Fuselage, Finish kit, QB wings ordered
Grateful to pay dues 18'

Reply With Quote
  #2  
Old 06-13-2018, 01:15 PM
StressedOut StressedOut is offline
 
Join Date: Jun 2017
Location: Fullerton, CA
Posts: 93
Default

Larry,

If you look in Section 4 of the plans, you'll find a parts list albeit not complete. In that list the material and thickness is specified.
__________________
Art Jackson
RV-14A Kit#140433
Completed: Vertical Stab/Horizontal Stab
Scrapped: Rudder
Working on: Empennage (Elevator)
Construction log - mykitlog.com/ajackson
Dues paid on 2 November 2017
Member of EAA Chapter 92 (KCNO)
Reply With Quote
  #3  
Old 06-13-2018, 01:26 PM
larrys larrys is offline
 
Join Date: May 2017
Location: Colorado Springs
Posts: 98
Default

Quote:
Originally Posted by StressedOut View Post
Larry,

If you look in Section 4 of the plans, you'll find a parts list albeit not complete. In that list the material and thickness is specified.
Thanks Art!
I drove to where the plane was and took a measurement. It is .025 where I need to add the access panel.
I am grateful for your help.
Thanks, Larry
__________________

RapidsetBuildings.com (Hangars)
Advertiser
RV-14 tail, QB Fuselage, Finish kit, QB wings ordered
Grateful to pay dues 18'

Reply With Quote
  #4  
Old 06-13-2018, 01:28 PM
larrys larrys is offline
 
Join Date: May 2017
Location: Colorado Springs
Posts: 98
Default

Quote:
Originally Posted by StressedOut View Post
Larry,

If you look in Section 4 of the plans, you'll find a parts list albeit not complete. In that list the material and thickness is specified.
I went to Troy high school, no wonder you call yourself stressed out! Pack up and move to Colorado, it might help. But you need to hurry from all the other Cal movers. Again, thanks for your help. Let me know if you are in the area. Larry
__________________

RapidsetBuildings.com (Hangars)
Advertiser
RV-14 tail, QB Fuselage, Finish kit, QB wings ordered
Grateful to pay dues 18'

Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:07 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.