I should have mentioned the following.
Inside width of the case mount needs to be 3" with a 7/16 diameter bolt hole for the alternator. I prefer the 3 hole mount version. I only mention this as I actually have a case mount bracket that came with my engine that has a inside width of 3.75 inches and a bolt hole diameter of 5/16. I could rig it to work with the Plane Power alternator but would rather get the correct bracket.
George or Bill if you have the one I need it would be fantastic.
Purchased RV6 - Slider Project
Currently flying X-Air LSA and Powered Parachute
Dues Paid 10/2017