VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-20-2018, 12:30 PM
Stockmanreef Stockmanreef is offline
 
Join Date: Nov 2012
Location: Midland, mi
Posts: 601
Default Canopy latch Torque tube block question

I am trying to install the torque tube assembly and it appears that this point that it won't fit with the Torque tube blocks in place (C-01420- L/R).

Are the holes for the torque tube in the C-01420 blocks supposed to be drilled all the way through?

I think that I am off by at least 1/4" or more from being able to get the assembly to fit.
__________________
Ken Stockman
Midland, MI
EAA Chapter 1093 member


RV-14 (serial number 140073)
N73XP (at least that # reserved now)
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:27 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.