What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Dynon D10-A EFIS <--> OAT Probe

YellowPeril

Well Known Member
Is it possible to use a non-Dynon OAT probe with the D10-A?

I'm upgrading from my trusty RMI microEncoder and would like to re-use the old probe if possible...

Anybody dunnit?
 
If you're using the remote compass the temperature bulb has 3 wires that plug into the EDC-10A remote compass. The temp probe from the RMI Encoder consists of a shielded twisted pair wire. My $.02 would be to just replace the Encoder probe with the Dynon probe. If your not using the Remote compass the manual refers you to a Dynon EMS product for a two wire OAT installation.
 
Yep. I'm using the Dynon remote compass.

I guess I'll shell out the $65 for the Dynon OAT probe.

It's not the money, it's just if I stick one more wire in this baby I may be over gross weight...
 
Back
Top