Aussieflyer
Active Member
At page 26-04 at figure 1 there is a call out for 48xK1000-08D (anchor nuts). The diagram shows 24 anchor nuts being fitted to the ramp section. If you count the remaining holes on the upper flanges you get a total of 48 anchor nuts that could be fitted. The plans are specific to rivet anchor nuts to the ramped flanges only. I contacted vans support and queried should I be installing 48 anchor nuts as described in figure 1 (the entire upper flanges) Vans replied the quantity of 48 was a typo and it should read 24 just rivet the anchor nuts to the ramped flange I.e. Use 24 not 48 anchor nuts.